Common Types Of Paint For Solid Wood Hangers
Jul 17, 2019
Types of paints, the most commonly used paints are NC and PU paints:
NC paint: nitro resin paint
(1) The construction is simple and convenient, the smell is fresh, and the drying speed is fast. It is widely used in furniture painting and interior decoration.
(2) The glossy clear topcoat has a plump film, high gloss, quick-drying and firmness, while the matte clear topcoat has a soft and pleasant luster, smooth hand feeling and unique taste.
(3) The yellowing resistance of yellow-resistant products and non-toxic yellow-resistant products is good.
(4) Nitro non-toxic yellow-resistant paint has excellent yellow resistance and color retention performance, high solid content, high film formation rate and good fullness, which is the best of nitro paint.
(5) Nitro is non-toxic and resistant to yellowing, does not contain benzene, free TDI, formaldehyde, and actually does not contain heavy metals, the paint film is plump, firm and resistant to yellowing, and simultaneous construction with latex paint will not cause latex paint to turn yellow.
(6) Nitro non-toxic yellow-resistant paint is a quick-drying paint, suitable for indoor and outdoor wooden doors and windows, furniture and other wood products and metal surfaces that have been properly primed. It is a high-end home decoration paint. , especially suitable for children's toys, children's furniture, solid wood hangers, painting and decoration of children's rooms and home kitchens.
PU paint: two-component polyurethane paint
Isocyanate group (-NCO) of component A (curing agent) + hydroxyl group (-OH) of component B (paint) = Polyurethane polymer (paint film) Thinner (Tina water): It is only used to adjust the viscosity and facilitate the The dilution effect of construction.
advantage:
(1) Compared with other paint types, under the same hardness, PU paint film has the highest elongation at break due to the effect of hydrogen bonds, so it is widely used in floor paint and deck paint;
(2) It has both protective and decorative properties, and can be used for the painting of advanced handicrafts, advanced woodware, pianos, large passenger aircraft, etc.;
(3) The paint film has strong adhesion. The paint film has excellent adhesion to a variety of surfaces (metal, wood, rubber, concrete, some plastics, etc.).
(4) The paint film has excellent chemical resistance, acid resistance, salt resistance, and petroleum products, so it can be drilled into the maintenance coatings of platforms, ships, chemical plants, and the inner wall lining of petroleum storage tanks.
(5) It can be dried and cured at low temperature. The construction season can be long.
(6) It can be combined with a variety of film-forming substances to make paint, and can be made into many varieties according to different requirements
To sum up, comparing the characteristics of the two paints, how should I choose the solid wood hanger, which is better? We can only say that each has its own merits: if you pay attention to the environmental protection of wooden hangers, the paint surface feel and aging resistance, choose NC (nitro) paint, if you pay attention to the wear resistance coefficient and higher decorative properties, you can choose PU paint.
To sum up, comparing the characteristics of the two paints, how should I choose the solid wood hanger, which is better? We can only say that each has its own merits: if you pay attention to the environmental protection of wooden hangers, the paint surface feel and aging resistance, choose NC (nitro) paint, if you pay attention to the wear resistance coefficient and higher decoration, you can choose PU paint.
