How to install telescopic clothes rack
May 03, 2022
1. Determine the installation position of the telescopic clothes rack on the outer balcony. The installed wall must not be bent, and check whether there is an insulation layer at the installation position.
2. Take out the outdoor push-pull clothes rack bracket from the package, determine the hole distance for the expansion screw installation, and use a marker pen to draw the hole to be drilled on the wall.
3. When ready, power on the drill and start drilling on the marked mark.
4. Install expansion screws on the outdoor push-pull clothes rack bracket, and tap with a hammer to install the bracket to the hole.
5. Take out the sleeve and tighten the expansion screw. At this point, the bracket has been installed.
6. There is an aluminum ring on the upper end of the bracket. We will use a screwdriver to unscrew the screws on the aluminum ring.
7. Install the aluminum rod of the outdoor push-pull clothes drying rack, put the aluminum rod into the aluminum ring, and fasten the screws just unscrewed.
